+86 183 02053458

jane@dgzhongzhi.com

Standard type - three chamber cold and heat shock test chamber

Share:

Description

The thermal shock test chamber is used to test the degree that the material or composite structure can withstand under the continuous environment of high temperature and low temperature in an instant, so as to test the chemical changes or physical damage caused by thermal expansion and contraction in the shortest time. Applicable objects include lithium batteries, metals, plastics, rubber, electronics and other materials, which can be used as a basis or reference for product improvement!

Features

The three boxes of equipment are divided into three parts: high temperature area, low temperature area and test area. The test product is placed in the test area, and the temperature of the high temperature area or low temperature area is rushed into the test area for impact. The test product is static.

Use touch control graphic operation interface, easy to operate.

Shock mode The temperature is imported into the test area by the air channel switching mode for cold and hot shock test.

When high temperature impact or low temperature impact, the maximum time can reach 999H, and the maximum cycle can reach 9999 times.

The system can be used for automatic circulation or manual selective impact, and can set 2 or 3 zone impact and cold shock hot shock start.

Cooling adopts binary freezing system, cooling effect is fast, cooling method is water-cooled.

Can test impact room temperature.


Core Parameters

Standard type - three chamber cold and heat shock test chamber
ModelCZ-I-42(A~C)CZ-I-80(A~C)CZ-I-100(A~C)CZ-I-150(A~C)CZ-I-252(A~C)CZ-I-450(A~C)
Inner Dimension WxHxD(mm)400x350x300500x400x400500x450x450600x500x500700x600x600800x750x750
Outer Dimension WxHxD(mm)1100x1850x14501500x1930x15301500x1950x16001600x2200x18501750x2120x19701900x2270x2210
Temperature Range(150℃ ~ A:-45℃; B:-55℃; C:-65℃); (High temperature zone :+60℃ ~ +150℃; Low temperature zone :-10℃ ~ -65℃)
Heating timeRT ~ 200℃ takes about 35min
Cooling timeRT ~ -70℃ takes about 55min
Temperature recovery time/transition time≤5min/≤10sec
Temperature control accuracy/distribution accuracy±0.5℃/±2.5%℃
Internal and external materialThe outer box is SUS304# stainless steel surface striping treatment or cold-rolled steel plate painting treatment (optional), the inner box is SUS304# stainless steel
Thermal insulation materialHigh temperature and high density aluminum silicate fiber cotton or PU foam insulating material
SystemP.I.D+S.S.R+ microcomputer balanced temperature control system
Cooling systemsSemi-enclosed two-stage compressor (water-cooled)/ Fully enclosed two-stage compressor (air-cooled)
Safety Protection DevicesNo fuse switch, compressor high and low pressure protection switch, refrigerant high pressure protection switch, fault warning system, electronic alarm
Spare partsObservation window (special optional type), two adjustable upper and lower layers, electric measuring line holes, casters, horizontal support
PowerAC380V 50Hz/60Hz 3Φ
Weight (approximate)700KG900KG1100KG1200KG1400KG1900KG
controllerSouth Korea's SAMWOM TECH
compressorTecumseh,France/Bitzer brand, Germany


Contact Us

Tel.: +86 0769 8880 8158

Mobile/What's App/WeChat: +86 183 02053458

Email: jane@dgzhongzhi.com

Add.: No. 417, Shatian Section, Port Road, Shatian Town, Dongguan City, Guangdong Province, 523981, China.

Request a Quote

Copyright © Guangdong Zhongzhi Testing Instruments Co., Ltd. 2024 All Rights Reserved | Sitemap