Home - Products - Salt Spray Chamber - Programmable brine spray tester - dry heat type

Programmable brine spray tester - dry heat type

This equipment is mainly used to detect discontinuities of metals and their alloys, metal overlays, organic overlays, anodized films and conversion films, such as pores or other defects. This salt spray machine laboratory heating adopts thermal radiation heating to maintain the required temperature of the test space, so as to ensure the accuracy of the test.

Inquire Now Next Product

Description

Saltwater spray tester - Dry heat type equipment is mainly used to detect discontinuities of metals and their alloys, metal coatings, organic coatings, anodized films and conversion films, such as pores or other defects. This salt spray machine laboratory heating adopts thermal radiation heating to maintain the required temperature of the test space, so as to ensure the accuracy of the test.

Core Parameters

Programmable brine spray tester - dry heat type
Model	GZZ-TB-1000C	GZZ-TB-1600C	GZZ-TB-2000C
Inner Dimension WxHxD(mm)	1200×800×1000	1600×800×1000	2000×800×1000
Outer Dimension WxHxD(mm)	1900×1600×1200	2300×1600×1200	2700×1600×1200
Laboratory temperature range	RT+5℃~60℃
Saturated barrel temperature range	RT~70℃
Humidity range	≥90RH
Brine spray rate	1.0~2.0ml/80cm²/h(collect for at least 16 hours and take the average value)
Spray pressure	70~170KPa
Potion PH value	6.5~7.2 / 3.0~3.2
PH of the collected solution	6.5~7.2 / 3.0~3.2
Sample placement Angle	20±5°(inclined to the vertical plane)
Inner/outer box material	Inner titanium plate, outer stainless steel plate paint
Spray pattern	Continuous spray, periodic spray choice
Control accuracy	Temperature departure
Control system	Color LCD display touch screen controller
Power supply condition	AC220V 50Hz/60Hz single-phase two-wire + protection grounding

Product meets test conditions and implementation standards

GB/T2423.17-2008 / IEC60068-2-11-1981 salt spray test method

ASTM.B117-2011 Salt spray test

ASTM-B368-09 Standard test method for copper acetate, salt spray test (CASS test)

JIS H8502 brine spray test method

GB/T10125-2012 / ISO 9227-2006 Test method for saline spray

GB/T5170.8-2008 Electrical and electronic products environmental test equipment inspection method - salt spray test equipment

GB/T5170.11-2008 Corrosive gas test equipment test method

GB/T10587-2006 salt spray test chamber technical conditions

GB/T20121-2006 / ISO11474-1998 Corrosion of metals and alloys - Corrosion tests in artificial atmospheres - accelerated outdoor tests under intermittent salt spray - scab test

Hot Products

Product Category