Home - Products - Salt Spray Chamber - Compound salt spray corrosion testing machine

Compound salt spray corrosion testing machine

The compound salt dry and wet testing machine (brine spray type) is mainly used for accelerating corrosion test of materials in the environment where salt water splash or seawater may be contacted outdoors. This equipment is closest to the natural condition, simulating the conditions more often encountered in the natural environment, and testing the self-synthesis under harsh conditions several times that of the natural environment. Such as salt spray, dry, wet, standing at room temperature, and other environment to self-integrate, can be performed in any sequence or separately.

Inquire Now Next Product

Description

The composite salt spray corrosion test chamber usually includes three parts: salt spray test stage, wet test stage and dry test stage. Composite salt spray machine is one of the "three prevention" (wet heat, salt spray, mold) test equipment for artificial climate environment, and is an important test equipment for studying various environmental adaptability and reliability in machinery, national defense industry, light industry electronics, instruments and other industries.

Features

Can do salt spray, dry, composite salt spray test.

Core Parameters

Compound salt spray corrosion testing machine
Model	CZZ-1000D	CZZ-1600D	CZZ-2000D
Inner Dimension WxHxD(mm)	1200x800x1000	1600x800x1000	2000x800x1000
Outer Dimension WxHxD(mm)	2250x1720x1220	2950x1720x1220	3550x1900x1220
Laboratory temperature range	20℃~70℃
Saturated barrel temperature range	RT~70℃
Humidity range	20%~98%RH
Brine spray rate	1.0~2.0ml/80cm²/h(collect for at least 16 hours and take the average value)
Spray pressure	70~170KPa
Sample placement Angle	20°±5°
Rapid alternating process of dry and wet salt spray	Salt spray test 1 min ~ 99 h any Settings;Drying experiment 1 min ~ 99 h any Settings; Humid heat test 1min~99H arbitrary setting;
Spray pattern	Continuous spray, cycle spray,cycle spray choice
Control accuracy	Temperature deviation: plus or minus 2.0 ℃; Temperature deviation: p 75 rh + 2-3% r.h. or less; Humidity deviation: < 75%RH ≤±5%R.H
Box material	Inner titanium plate, outer stainless steel plate paint
Type of cooling	Water-cooling
Control system	Siemens PLC+ Siemens Temperature Module + HMI
Power supply condition	AC380V 50Hz(customized at 60Hz) three-phase four-wire + protective grounding

Product meets test conditions and implementation standards

DO160E/F/G salt spray test requirements

GB/T20854-20071S014993-2001 Accelerated testing of corrosion cycles of metals and alloys exposed to salt spray, "dry" and "wet" conditions

GB/T24195-2009/1S016151:2005 Acid salt spray, dry and wet conditions of accelerated corrosion test

GJB150.11A-2009 Military equipment laboratory environmental test method salt spray test

GB/T2424.17-2008/1EC60068-2-11:1981 Salt spray test method

GB/T2423.18-2012/1EC60068-2-52:1996 Alternating salt spray test method for sodium chloride

GB/T2423.3-2006/1EC6008-2-78-2001 Test cab: Constant wet heat test method

GB/T10125-2012/1S09227-2006 Artificial atmosphere corrosion test salt spray test

Lithium-ion power battery packs and systems for electric vehicles - Part 3: Safety requirements and test methods: salt spray test

ASTM B117, ASTM B368

GB/T10587-2006 salt spray test chamber technical conditions

GBT10586-2006 wet heat test chamber technical conditions

GB/T5170.8-2008 Electrical and electronic products environmental test equipment inspection method - salt spray test equipment

Hot Products

Product Category