Home - Products - Salt Spray Chamber - Combined salt wet and dry testing machine - brine spray type

Combined salt wet and dry testing machine - brine spray type

Salt wet and dry testing machine (salt spray type) is mainly used for accelerating corrosion test of materials in the environment where salt water splash or seawater may be exposed outdoors. The equipment is close to natural conditions, simulated in the natural environment more often, and tested in harsh conditions several times that of the natural environment, such as salt spray, dry, wet, standing at room temperature, etc. Tests can be performed in any order or individually.

Inquire Now Next Product

Description

Composite salt spray dry and wet salt spray testing machine (salt spray type) is mainly used for accelerating corrosion test of materials in the environment that may be exposed to salt water splash or seawater outdoors. The equipment is close to natural conditions, simulated in the natural environment more often encountered conditions, and tested in the harsh conditions several times that of the natural environment. Such as salt spray, dry, wet, standing at room temperature, and other environments to self-integrate, can be performed in any sequence or separately.

Core Parameters

Combined salt wet and dry testing machine - brine spray type
Model	CZZ-1000DF	CZZ-1600DF	CZZ-2000DF
Inner Dimension WxHxD(mm)	1200x800x1000	1600x800x1000	2000x800x1000
Outer Dimension WxHxD(mm)	2250x1720x1220	2950x1720x1220	3550x1900x1220
Laboratory temperature range	20℃~70℃
Saturated barrel temperature range	RT~70℃
Humidity range	20%~98%RH
Amount of brine spray	15±5mm/h(120±40mL/h/80cm²)
Brine temperature	RT~35℃
Spray pipe swing Angle	±60°
Sample placement Angle	20°±5°
Rapid alternating process of dry and wet salt spray	Salt spray test 1 min ~ 99 h any Settings; Drying experiment 1 min ~ 99 h any Settings; Humid heat test 1min~99H arbitrary setting;
Spray mode	Continuous spray, cycle spray, cycle spray choice
Control accuracy	Temperature deviation: plus or minus 2.0 ℃;Temperature deviation: p75 rh + 2-3% r.h. or less; Humidity deviation: <75%RH ≤±5%R.H
Box material	Inner titanium plate, outer stainless steel plate paint
Cooling mode	Water cooling
Control system	Siemens PLC+ Siemens Temperature Module + HMI
Power supply condition	AC380V 50Hz(customized at 60Hz) three-phase four-wire + protective grounding

Product meets test conditions and implementation standards

GB/T 20853-2007 / ISO 16701:2003 Corrosion of metals and alloys Corrosion exposure to intermittent spraying in the artificial atmosphere

Accelerated corrosion test under controlled conditions of salt solution and moisture cycle

Volvo Salt Spray test 423-0014

GB/T2423.3-2006 / IEC 6008-2-78-2001 Test cab: Constant wet heat test method

GB/T10587-2006 salt spray test chamber technical conditions

GB/T10586-2006 Wet heat test chamber technical conditions

GB/T5170.8-2008 Electrical and electronic products environmental test equipment inspection method - salt spray test equipment

Hot Products

Product Category